If you're new here, you may want to subscribe to my RSS feed right now, before you forget, to get the latest posts. Thanks for visiting!

Ingenious idea.

I just learned a tip to about how to use automated technology to fool autodialers and telemarketing dialers into thinking your phone number is no longer in service and that it should be removed from their system.

The Technical Facts

In telephony, the special information tone is actually a series of three audio tones, which indicate that a telephone call cannot be completed. This series, consisting of a low, medium, and high tone, is used nearly everywhere in the North American Numbering Plan, and is an important type of call progress tone.

The basic SIT protocol is defined by the ITU. The duration of each tone is 330 milliseconds, plus or minus 70, and is within 50 hertz of the reference frequency. The first tone is always the lowest at 950Hz, the middle tone is 1400Hz, and the last is always the highest at 1800Hz.

There are several different variations of the SIT, with the NANP intercept tone being 913.8Hz for 274ms, then 1370.6Hz for 274ms, and 1776.7Hz for 380ms. Each of these slight variations is within the ITU-specified range.

The first tone is the most important, as this approximately 918Hz signal tells automated dialing equipment that there is a problem. Many predictive dialers, used in telemarketing, pick up on this and delete the telephone number from their database. The Telezapper and other devices use only this tone, so that it is not misunderstood by an actual live person who may be the calling party, as the tone is transmitted every time the called party (or their answering machine) picks up. Using only the single tone without the following two will not work with some dialers, and some now ignore tones completely. While the implementation of state and Federal “do not call” laws in the United States were intended to render such devices moot, recent innovations in telemarketing, such as systems which ignore the SIT signalling, have brought about a renewed interest in the use of the tones to foil telemarketers. Audio files of the tones are available on several web sites, which allows individuals to record them onto their answering devices for playback to unwanted callers.

How to Fool The Machines

You can fool the markets by changing your answering message to first play this U.S. Special Information Tone WAV file when your answering machine first answers the phone. Most computer dialers, including probably debt collector systems, will hear these tones and make a note that your number is no longer in service. Just let your friends know what is going on so they can have a laugh at your new answering message.

It’s a high tech idea with a low tech implementation.

-----

If you enjoyed this post be sure to grab the RSS feed or get posts by email so you don't miss a bit of what's to come.

Steve

Related Posts